Lashing Chain Sling
Lashing Chain Sling
Ultimate Lifting Solutions offer a vast selection of lashing chains and tie down chain slings. We have various sized chain available from 8mm, 10mm 13mm and 16mm. ULS can make up the lashing chains to suit your unique requirements. All of ULS chains are manufactured from high quality, high strength chain in grade 8, grade 10 lashing chains are available on request. ULS Lifting offer both standard Lashing Chain from grade 8 chain and lashing chain manufactured in accordance to BS EN121953
The ULS Lashing chains are a great practical solution for securing loads before transportation. From a small mini digger to a JCB, from engineering steel profiles and a huge, fabricated silo. The Ultimate Lifting Solutions Ltd chain kits are up to the task.
If you cannot see what you require call ULS on 01384 986 0326 or email us on sales@ulslifting.com and we will contact, you back immediately.
Lashing Chains with Hook Ends
LS1L
£11.45 ex VAT
£13.74 inc VAT
Lashing Chain
Tie Down chains or lashing chains are commonly used when heavy
engineered products, steelwork / structures or large machinery or even vehicles
are needed to be secured before transportation. It could be securing a load
within a container for overseas shipment. It could be a farmer needing to move
a tractor and wants to make sure his farming machinery is secure before
transportation, it could be a JCB or a digger, needing moving to a construction
or builder’s site. It can even be a steel stockholder that needs to secure their
load before transporting engineering steel profiles and plates. No matter what
the requirements ultimate lifting solutions can offer lashing and towing
equipment to suit – the ULS range of low loader chains start from 8mm dia chain
with a high strength lashing capacity of 4 tonne or 4000daN (kgs) – these are
great for lashing down smaller loads such as mini diggers on trailers. The 8mm
lashing chain are very strong and have a minimum breaking load of 8 tonne. Our most
common size is 10mm with a lashing capacity of 6.3 tonne, idea for lashing down
medium sized structures and vehicles. 10mm lashing chain has a minimum breaking
load of 12.6 tonne and when used in pairs or in multiples of four, are idea for
a multi-point lashing chain system of loads between 10 tonne and twenty tonnes.
If you are required to secure large loads and long heavy loads, then you might
consider either big heavy duty 13mm lashing chain systems or our 16mm lashing chain
systems. 13mm lashing chain have a 10-tonne capacity per lashing chain and 16mm
tie down chains have a lashing capacity of 16 tonne per chain – both these
chains are big and heavy and consideration required on when to use this size of
lashing chain, due to their physical size and weight.
Lashing Chain end fittings
Depending on what items or objects are been secured
down, from moving machinery to moving a portacabin or maybe your securing a
load inside a container, on the back of a flat bed with lashing points then the
end fittings of the lashing chain might need to be different – the standard
lashing chain come with either the small grab hook or the sling hook – The Grab
hook is just wider than the chain diameter is easily slides over a link of
chain to lock into place. The sling hook will snap onto the chain and is great for
natural choking or tightening up on to the chain.