Forklift Drum Grab UK Manufactured

Benefits and main features

Suitable for use with 210 litre (45 gallon) steel drums, allowing this common drum to be handled with no risk of injury

Manufactured with ample sized fork pockets to suit most fork trucks, no need to risk back strain through manual handling

Simple yet quality design with only few moving parts offering low maintenance and servicing costs

Fully automatic in operation, reducing time and labour costs as operator stays seated all the time

Quick and easy to fitment both on and off the forklift with heavy duty zinc plated screw clamps for safe securing to forklift

'CE' marked and supplied with Certificate of Conformity for Health & Safety Regulations

MAINTENANCE of Drum Grabs

The Drum Lifter should be inspected every time it is used but no later than weekly for general condition with particular attention paid to: 

All weld points, Wear and distortion of fork pockets and swinging arms, Any damaged parts, and the thumb screws and pivots – Any problems found must be rectified immediately.

Check for general surface rusting especially in critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.

All pivots and thumbscrews must be kept lightly greased.

This product is certified for six (6) months from the date of manufacture after which it is the customer’s responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by The HSE.