Get in touch01384 986 026

We Accept:

Request A Quote Checkout

DIN582 Eyenut Zinc Plated

Key notes for ordering:

Zinc Plated finish as standard - Supplied tested with relevant certification. Serial Number stamping on body of eyebolt available on request.

Estimated lead time:1 - 2 Days

Please call us if you need this item sooner

CLICK
& COLLECT
Next day
delivery
SAME DAY
DELIVERY
(Call us)

Seen this product cheaper elsewhere?

We will always try to offer this product at the best price. We will do our best to not just match it but to beat it.

Price match
promise

DIN582 Eyenut Zinc Plated

Brand:

Capacity

80Kgs up to 12,500Kgs
(0.08t - 12.5 tonnes)

Description

DIN582 Eyenuts supplied tested and certified, are manufactured in accordance to DIN582. with galv finish. Sizes M6 to M64 available from stock.

£0.89 ex VAT

£1.07 inc VAT

Add to cart Add to quote

Related products

ZINC PLATED DIN582 Eyenuts with large lifting eye, are manufactured in accordance to the DIN582 Standard. Sizes M6 to M64 available from stock. Used in a wide variety of applications and commonly used to create a safe and secure lifting / anchor point between a load and a lifting sling. 

Zinc Plated Finish
Material: Carbon Steel - C15 

Each Eyenut stamped with SWL and Batch Number
SWL - Safe working Load from 80kg up to 12.5 tonne
S.W.L. Shown at 0° (vertical) angle of lift.
Safety Factor - 4 x SWL

Product Code
Thread.
Eye Dia
SWL
Weight
DINENM06ZP
M6.
20mm
0.08 t
0.05 Kgs
DINENM08ZP
M8.
20mm
0.14 t
0.05 Kgs
DINENM10ZP
M10.
25mm
0.23 t
0.09 Kgs
DINENM12ZP
M12.
30mm
0.34 t
0.16 Kgs
DINENM16ZP
M16.
35mm
0.7 t
0.25 Kgs
DINENM20ZP
M20.
40mm
1.2 t
0.38 Kgs
DINENM24ZP
M24.
50mm
1.8 t
0.72 Kgs
DINENM30ZP
M30.
60mm
3.6 t
1.32 Kgs

Larger sizes up to M64 available on request .

DIN582 Eyenut Alignment of the eye is also very important. Eyenuts can be used up to the marked SWL provided that the load is in line with the axis of the Eyenut.


Product Code
Thread.
Eye Dia
SWL
Weight
DINENM06ZP
M6.
20mm
0.08 t
0.05 Kgs
DINENM08ZP
M8.
20mm
0.14 t
0.05 Kgs
DINENM10ZP
M10.
25mm
0.23 t
0.09 Kgs
DINENM12ZP
M12.
30mm
0.34 t
0.16 Kgs
DINENM16ZP
M16.
35mm
0.7 t
0.25 Kgs
DINENM20ZP
M20.
40mm
1.2 t
0.38 Kgs
DINENM24ZP
M24.
50mm
1.8 t
0.72 Kgs
DINENM30ZP
M30.
60mm
3.6 t
1.32 Kgs


Larger sizes up to M64 available on request.

DIN582 eyenut Alignment of the eye is also very important. Eyenuts can be used up to the marked SWL provided that the load is in line with the axis of the eyenut.

In-service Inspection and Maintenance

Maintenance requirements are minimal. Keep eyenuts clean, protect from corrosion and protect threads from damage. Do not attempt to straighten bent eyebolts or re-cut threads.
Regularly inspect eyenuts and, in the event of the following defects, refer the eyebolt to a Competent Person for thorough examination: illegible markings; distortion; worn; incomplete or incorrectly formed internal threads; damaged eyes; nicks, gouges, cracks, corrosion or other defects.

In the UK, the Lifting Operations & Lifting Equipment Regulations (LOLER) make it clear that all shackles and eyebolts/eyenuts used for lifting purposes are lifting accessories. They should therefore be subject to a thorough examination by a competent person at least every six months. Regardless of the prevailing legislation, the Lifting Equipment Engineers Association (LEEA) strongly recommends that this policy is adopted by all those with responsibility for ensuring the safe condition of lifting equipment.

If you are in any double please contact Ultimate Lifting Solutions to discuss your LOLER / Thorough Examination requirements, we have trained engineers that can carry out all your inspection / services either on-site or in-house

Write a review

More products from category:

Lifting Accessories

10mm Skip Chain - Grade 8

SLC10

Replacement 10mm Skip Chain - Grade 8. The ULS Lifting 10mm Skip Lorry chain replaces the worn-out Skip Chains commonly found on Skip Lorries in the UK. Just count up the links of the chain, and we can supply the exact length required. supplied fully tested with certification

£9.98 ex VAT

£11.98 inc VAT

10mm Skip Chain Connectors

SCC10

10mm Skip Chain Connectors for connecting the skip chains to the top mast of the skip lorry. These 10mm Grade 8 Skip Connectors are easy to connect to the chains, using the supplied pins. Rated to 3.15 tonne per skip connector.

£5.98 ex VAT

£7.18 inc VAT

13mm Skip Chain - Grade 8

SLC13

Replacement 13mm Skip Chain - Grade 8. The ULS Lifting 13mm Skip Lorry chain can be used to replace the worn-out Skip chains. Just count up the links of the chain, and we can supply the exact length required. supplied fully tested with certification

£16.98 ex VAT

£20.38 inc VAT

13mm Skip Chain Connectors

SCC13

13mm Skip Chain Connectors for connecting the skip chains to the top mast of the skip lorry. These 13mm Grade 80 Skip Connectors are easy to connect to the chains, using the supplied pins. Rated to 5.3 tonnes per skip connector.

£8.50 ex VAT

£10.20 inc VAT

16mm Skip Chain - Grade 8

SLC16

Replacement 16mm Skip Chain - Grade 8. The ULS Lifting 16mm Skip Lorry chain can be used to replace the worn-out Skip chains on the larger capacity Skip Loaders. Can be supplied to the exact length if required. Supplied fully tested with certification

£24.98 ex VAT

£29.98 inc VAT

16mm Skip Chain Connectors

SCC16

16mm Skip Chain Connectors for connecting the skip chains to the top mast of the skip lorry. These Skip connectors are only used on the larger capacity Skip Loaders and can only be used with 16mm Skip chain rated to 8 tonne

£12.98 ex VAT

£15.58 inc VAT

BO 5107900 - Bohle Professional Glass Cleaner

BO 5107900

Price is for a 12 cannister box size.

Can be used for glass, smooth plastic surfaces, mirrors, car windows, tiles · for workshop and home, showcases and display windows · sparkling surfaces without streaking · environmentally sound propellant Ideal for cleaning glass parts after fusing.

£44.98 ex VAT

£53.98 inc VAT

Camlok 92 Series Vertical Plate Clamp

92 Series

Camlok Vertical Plate Clamps (92 series). Primarily used for transporting sheet metal and steel plates in the vertical position - The 92 series is manufactured in the UK offering a top quality / performing clamp - spare parts are ready off the shelf.

£188.88 ex VAT

£169.98 ex VAT

£203.98 inc VAT

View all

SUBSCRIBE FOR THE LATEST NEWS & SPECIAL OFFERS

Sign up here to get the latest news, updates and special offers delivered to your inbox.

Sign Up

We use cookies to give you the best experience on our website. By continuing to use this site you agree to our use of cookies.