Enerpac Lifting Tools and Equipment

Enerpac AM21 Premounted Hydraulic Manifold complete with 1 inlet and 2 outlet ports. These Enerpac Control Manifolds will control two or four single-acting cylinders simultaneously. Supplied with 5 ports all with 3/8" NPTF Thread.

The Enerpac C604 High Flow Hydraulic Coupler - Complete Set includes the CH604 Male Half & CR400 Female Half. These 3/8" high-flow couplers provide a quick and secure connection, allowing a flow of up to 2100 in3/min (35 litres) per minute

The Enerpac CH604 High Flow Hydraulic Coupler - Male Half is part of the C Series range. The standard used on most Enerpac pumps and cylinders up to 700 bar. These 3/8" high-flow couplers provide a quick and secure connection to hydraulic lines

The Enerpac CR400 High Flow Hydraulic Coupler - Male Half is part of the C Series range that is the standard used on most Enerpac pumps and cylinders is up to 700 bar. These 3/8" high-flow couplers provide a quick and secure connection to hydraulic lines

Enerpac GA2 Gauge Adaptor is used for easy mounting of a pressure gauge into your hydraulic system. The male end screws into the pump or cylinder port, the female end accepts the hydraulic hose or coupler, the third port is for gauge connection

Enerpac GA3 Gauge Adaptor is used for easy mounting of a pressure gauge into your hydraulic system. The male end screws into the pump or cylinder port, the female end accepts the hydraulic hose or coupler, the third port is for gauge connection

The Enerpac GA45GC, 45 Degree Angled Gauge Adaptor Assembly provides a window to your hydraulic system that allows for easy reading of the pressure creating a safer operation.

Enerpac GP10S Hydraulic Pressure Gauge is a standard general service gauge calibrated with dual scale readings for pressure in both bar and psi. This is a dry (non-glycerine) style gauge with a 100mm face diameter and 1/2" NPTF thread

The Enerpac HC7206 High-Pressure Hydraulic Hose x 1.8m long is available for next-day delivery from the ULS Lifting online store. Used to connect Cylinders to Pumps. Manufactured from thermo-plastic hoses for demanding applications. The HC7206 High-Pressure hose has an operating pressure of 700 Bar.

Enerpac Hydraulic Oil 1 litre HF95X available from ULS Lifting - This is genuine Enerpac Oil. Use only genuine Enerpac Hydraulic Oil, the use of any other fluid will render your Enerpac warranty null and void.

Enerpac Hydraulic Oil 5 litre HF95Y available from ULS Lifting - This is genuine Enerpac Oil. Use only genuine Enerpac Hydraulic Oil, the use of any other fluid will render your Enerpac warranty null and void.

Enerpac LW16 Vertical Lifting Wedge is ideal when you need to lift and lower heavy loads of up to 16 tons with a stable motion without slippage. A minimum insertion gap of 10 mm is needed which expands up to 51.5 mm. Retraction force is supplied by the single-acting spring return cylinder.